Heavy Duty Auto Strut Coil Spring Compressor 3Ton Air Hydraulic Disassemble Tool. The brand new spring strut compressor is compressed to a capacity of 3 tons (6600 lbs).The height is adjustable with the 7 holes on the column. Removes the toughest strut spring for quick replacement. Helps in the repair of strut components. Indispensable tool for car repair. The coil spring compressor should be securely fastened to the flat bottom before use.
Make sure that the yoke pins are correctly positioned and the safety clips are properly attached. When compressing the spring, always stand next to the device. When not in use, clean and store the spring compressor in a safe and dry place.
Keep the spring tensioner in good condition. Use only genuine parts to replace or repair damaged parts. Before each use, check the compressor to see if it is in good condition.
If in doubt, DO NOT use the device. Refilling the hydraulic system is rarely required. However, the oil level should be checked. To check the oil level, make sure that the plunger is fully lowered, remove the filler plug, and check that the level is within 10 mm of the filler opening. If necessary top up with hydraulic oil.KEEP CHILDREN AWAY FROM UNITY. Fast and safe spring compressor. Foot pedal operated with quick release. For most vehicle models and sizes. The bracket bracket can be moved to adjust the height. Good materials for reliable quality. Load capacity: 3T (6600 lbs). Stroke of the cylinder piston: 320 mm (12.6).
Piston diameter: 28 mm (1.1). Support bar open: 65 51 mm (2.6 " 2"). Support bar open: 60 300 mm (2.4 " 11.8"). Lifting height: 495 820 mm (19.5 " 32.3").
Height adjustment: Adjustable with 7 holes on the column. Packaging dimensions: 107 26 19 cm (42.1 10.2 " 7.5").1 x 3-ton strut compactor with automatic strut. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Product description The brand new spring strut compressor is compressed to a capacity of 3 tons (6600 lbs).
Application Removes the toughest strut spring for quick replacement. Safety instructions The coil spring compressor should be securely fastened to the flat bottom before use.
The item "Heavy Duty Auto Strut Coil Spring Compressor 3Ton Air Hydraulic Disassemble Tool" is in sale since Monday, June 8, 2020. This item is in the category "eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Strut Compressors". The seller is "top5zoom" and is located in Rowland Heights, California. This item can be shipped to United States.