5 Ton 12V Electric Car Hydraulic Jack Adjustable Scissor Lift Jack Lifting Tool. Less than 5.0 Tonne. 5 Ton Power Hydraulic Floor Lifting Tool. We guarantee 100% High-quality, 2. The use of electric jin items.(1) Car parked on a level surface, turn off the engine, but do not forget to tighten the hand brake. (2) Steel beam placed at the electric jack to change a tire near the body is under the top hat and the electric jack beneath the anchor body alignment, the electric jack can be safe and effective lifting. (3) Two ways the electric jack is connected to the 12V power supply. Using cigarette lighter connection: the cigarette lighter plug cord into the cigarette lighter socket and the other end of the 5.5mm plug to 5.5mm plug seat on the electric jack. (Note: The cigarette lighter fuse rated current of not less than 10A). Using the vehicle's battery is connected directly: the cigarette lighter plug cord into the belt clip at one end of the battery in the cigarette lighter socket, while the other end of the battery clip battery clamps red "+" (positive) on the black clip and battery "-" (negative), and then plug the other end of the cigarette lighter plug wire 5.5mm 5.5mm jack plug into the electric plug socket.
(4) Use: In determining well after the first few steps, you can start jacking operation. Hold the remote control, if necessary, press the button on the remote control, "x1" said the rose, "x2" said the decline, "x3 " means stop. (5) The lifting process, should be carefully observed dynamic jacking ensure electric jack does not tilt, until the wheels leave the ground 20mm, the wheels can rotate freely should stop jacking, replace the tire.
The use of electric wrench. (1) When the wheels leave the ground to be replaced, will take a good supply of electric wrench (the electric wrench 5.5mm plug directly into the cigarette lighter power cord plug 5.5mm plug seat). (2) Selecting the right sleeve, set into the side of the square hole axis electric wrench at the top of the head, you can loosen or tighten the bolts.
(3) The desired direction of the work, choose loose, tight switch. With the thumb and hold the appropriate direction switch, heard 1-2 times "despair, despair" to release the thumb after the crash, the whole process about 2-3 seconds. Feedback is very important to us.It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. The use of electric jin items: (1) Car parked on a level surface, turn off the engine, but do not forget to tighten the hand brake. (3) Two ways the electric jack is connected to the 12V power supply: I. The item "5 Ton 12V Electric Car Hydraulic Jack Adjustable Scissor Lift Jack Lifting Tool" is in sale since Saturday, September 5, 2020. This item is in the category "eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Auto Lifts & Frame Machines". The seller is "yixinstore1" and is located in La Puente, California. This item can be shipped to United States.