Hydraulic Cylinder Jack Heavy Duty 50 Ton Tire Repair Lift Tool Alloy Steel

  
Hydraulic Cylinder Jack Heavy Duty 50 Ton Tire Repair Lift Tool Alloy Steel. With a strong piston rod, this hydraulic jack has a strong lifting capacity of up to 110,231 lbs, which makes it possible to lift a variety of heavy items quickly and securely. The compact design is not only easy to carry, but can also work in tight spaces. With this jack, you can quickly jack up your car with just the slightest movement, saving time and effort! Sturdy and Durable: It is made of high-quality alloy steel with baking paint treatment on the surface, which is very reinforced, anti-oxidation, anti-rust, and impact-resistant, for a strong inclusive working environment as well as ensuring a long service life. Powerful Lifting Force : The smooth surface of the piston rod is beautiful, anti-corrosion, and also has strong pressure resistance, with a strong lifting force of 50T/110,231 lbs. Sufficient Lifting Height: In addition to the height of the jack body (10.23in), the piston rod (5.9in) and screw rod (2.36in) can be raised to increase the stroke, so that the jack can be lifted higher (up to 18.5in) to a wider range of uses. High / Low-Temperature Resistance: The hydraulic system uses high-quality lubricants for better corrosion resistance and high/low-temperature flexibility allowing it to operate at temperatures between -4°F and 113°F. Compact and Portable: Its compact size is suitable for narrow and low working spaces, and can be easily carried in the trunk of a vehicle.

In addition, it has a handle that makes it easy to move and carry to any location. Good Sealing: It uses a rubber oil plug with a seal inside, which ensures a good seal against oil leakage. High Safety: It is equipped with a safety valve that can automatically protect the hydraulic system in case of overload to prevent damage to the jack. At the same time, the height-limiting device prevents over-pumping and gives you safety assurance.

Customer Service: We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Oil Return Valve: The oil return valve at the bottom makes it easy to raise the piston rod and retract the rod to the cylinder after use, tightening clockwise to raise and loosening counterclockwise to lower. Practical Rocking Lever: It adopts a spliced and extended lever, which can easily twist the oil valve and press the jack manually, which is labor-saving and practical.

It can also be disassembled for easy carrying and storage. Enlarged Base: It is designed with an enlarged square base(7.246.29in) to increase the contact area with the ground, ensuring stable placement without shifting or shaking when working. Anti-slip Top : The top of the jack is designed with a criss-cross pattern for good anti-slip and stability to improve safety.

It can be used in military applications, agriculture and industrial environments to lifting cars, trucks, SUVs, farm vehicles, heavy-duty machinery and industrial equipment. Insert the grooved end of the pressure lever into the return valve and tighten clockwise. Adjust the height of the adjusting screw according to the height of the car body.

Insert the jack handle into the handle sleeve. Shake the handle up and down to lift the body to the desired height smoothly. When lowering, turn the return valve counterclockwise 1-2 turns, remember to turn slowly, and the return valve can not loose more, otherwise it will lead to oil leakage. Lifting Height: 15cm /5.9in. Adjustment Height: 6cm /2.36in.

Maximum Lifting Height: 47cm /18.5in. Base Size: 18.416cm/7.246.29in. Loading Capacity: 50T/110,231 lbs. Packing Size: 201728cm/7.876.6911.02in. Please read the operating manual completely before use.

And pay particular attention to the safety instructions included. This is a hydraulic jack and cannot be used for jacking or fixing for a long time. It is prohibited to screw out the oil valve, otherwise the use of the product will be affected. Overload operation is strictly prohibited. Please use above the hard support surface. Please do not lift the jack to the top when there is no load.

If the jack cannot be lifted, please check whether the oil valve is tightened. Park the vehicle on a level and hard ground before using the jack, and open the danger warning sign behind you.

When the jack supports the vehicle, it is strictly forbidden to enter the vehicle bottom! Observe the car chassis and put the jack inside the side frame. To ensure the normal use of the jack, please keep the jack piston rod clean and lubricated.

When the jack is not in use, the oil drain valve should be closed first and the jack should be placed vertically, otherwise oil leakage will occur! Please make sure you don't mind before ordering. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. Feedback is very important to us.

It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.

Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Jacks & Jack Stands". The seller is "luck5star" and is located in this country: US.

• Type: Bottle Jack
• Number of Pieces: As shown
• Drive: Hydraulic
• Material: Alloy Steel
• Color: Red
• Process: Baking Paint
• Operation Temperature: -20~45°C/-4~113°F
• Body Height: 26cm/10.23in
• Lifting Height: 15cm /5.9in
• Adjustment Height: 6cm /2.36in
• Maximum Lifting Height: 47cm /18.5in
• Housing Diameter: 14cm/5.51in
• Base Size: 18.4*16cm/7.24*6.29in
• Product Height: 26cm/10.23in
• Loading Capacity: 50T/110,231 lbs
• Brand: Unbranded